Our Products
Motorized Driven Live Roller Zero - Pressure Zone Accumulation Conveyor Is designed for low energy consumption (run-only-as-required), ease of maintenance (no drive transmission), and is suitable for many zone accumulation conveyor applications for loads up to 100LBS.
CASE/EMPTY DRUM/TOTE TRANSPORTATION
ZERO PRESSURE ZONE ACCUMULATION
NO GEARMOTORS
LOW ENERGY CONSUMPTION
24VDC LOW POWER CONSUMPTION
STANDARD FEATURES
12'” - 48" Between Frame
10 Ga Formed Channel Frame with Rollers Set Low
24VDC Drive Motor (1 Per Zone)
Driver/Zone Accumulation Card
Variable Speed 24VDC Drive Card
1.9" Diameter x 12ga and 16ga Galvanized Rollers
2 1/4", 3". 4", 5" and 6" on Center
Poly-V Belts from Drive roller to Driven Idler Rollers
Adjustable H-Stand Supports
Powder Coat (Many RAL Color Choices Available)
Photo-Eyes for Zone Logic Control (Plug & Play)
120VAC/24VDC Power Supplies Available
Pop Up Chain Transfer for pallet loads up to 3000lbs. Embeds into roller conveyor with external or thru frame. 2, 3 or more strands. Transfer full loads 90 Degrees
NOW AVAILAVLE with Motorized Lift for Airless Operation. Ideal for Freezer Applications.
STANDARD FEATUERS
Center Drive with Integral Take-Ups
Inverter Ready Gearmotor (230V/460VAC)
30 to 60 FPM Per Application
Channel Frame with Tyvar Chain Guides
#2060 High Sidebar Chair
Fixed End Idler Sprockets with Internal Bearings
Motorized Lift with Positive Lift Linkage & Brake
Position Detection Proximity Switches
Adjustable Feet for Required Elevation
Powder Coat (Many RAL Color Choices Available)
Pop Up Transfers are used to lift and transfer heavy loads at right angles to a conveyor. Transfer stays lowered for product to pass over until needed. Powder Coat finish in choice of 13 standard colors.
Turntables are commonly used to change the conveyed direction of a pallet/unit load, in a fairly tight space. These devices can be manually rotated, powered via an air cylinder for a 90 degree (or less) transfer, or motorized.
Convey, Rotate and Transfer Pallet Loads
Rugged Construction
90 - 180 - 270 - 360 Degree Rotation Available
Motorized Turntable transfers are designed to redirect a conveyed pallet load while maintaining load orientation on the conveyor. Motorized turntables can be built to rotate to almost and degree of rotation as required by the application.
STANDARD FEATURES
72" or 80" Diameter Table (Application Driven)
Timing Belt Drive to Urethane Coated Drive Wheel
Inverter Ready TEFC Brake/Gearmotor (230V/460VAC) x 3 RPM
Heavy Duty Rotating Plate with Thrust Bearing Support
Fixed End Stops with Adjustable Shock Absorber impact Pads
Adjustable Feet for Required Elevation
End of Travel or Near End of Travel Detection Proximity Switches (24VDC) Devices Wired to Terminal Box
Powder Coat (Many RAL Color Choices Available)
Drag Chain Conveyor is used when the bottom of a load can span the space between chains. Typically used with pallets, slave boards, and castings. Positive drive is ideal for use in oily, or contaminated environments. Available with 2, 3, or 4 strands of chain in a variety of sizes. Powder Coat finish in choice of 13 standard colors.
STANDARD FEATURES
Center Drive with Integral Take-Ups (Reversable)
Inverter Ready Gearmotor (230V/460VAC)
30 to 60 FPM (Per Application)
Channel Frame with Tyvar Chain Guides
2060 or 2080 High Sidebar Chain
Fixed End Idler Sprockets with Internal Bearings
Adjustable Feet for Required Elevation
Powder Coat (Many RAL Color Choices Available)
Drag Chain Conveyor is used when the bottom of a load can span the space between chains. Typically used with pallets, slave boards, and castings. Positive drive is ideal for use in oily, or contaminated environments. Available with 2, 3, or 4 strands of chain in a variety of sizes. Powder Coat finish in choice of 13 standard colors.
STANDARD FEATURES
Center Drive with Integral Take-Ups (Reversable)
Inverter Ready Gearmotor (230V/460VAC)
30 to 60 FPM (Per Application)
Channel Frame with Tyvar Chain Guides
2060 or 2080 High Sidebar Chain
Fixed End Idler Sprockets with Internal Bearings
Adjustable Feet for Required Elevation
Powder Coat (Many RAL Color Choices Available)
Our Bag Flatteners feature a rugged design for continuous duty, with an easy to use variable bag pressure setting valve. With the incorporated guarding, this Unit is also one of the safest units available.
Pallet Dispenser designed to work with many types of conveyor equipment and pallet types. Suitable for GMA/CHEP/EURO Pallets. With rugged motorized vertical lift and storage for up to 15 pallets. Pneumatic storage arms and side or thru discharge.
STANDARD FEATURES
Chain Sprocket Lift Escapement Carriage with Counter Weight Take Up
1HP TEFC Brake-Gearmotor
Capable of 3 Dispensing Cycles Per Minute
Welded/Structural Channel Construction with Linear Travel Guides
Air Operated/Linear Guided Air Cylinder Actuated Storage Forks
Double Sol Valve + Position Detection Proximity Switches + Filler/Regulator Elevation per Application
3 Lift Carriage Position Detection Proximity Switches
2 Lift Carriage Over-Travel Detection Limit Switches
Powder Coat (Many RAL Colors Available)
Flat Wire Mesh Belt is generally used to positively convey medium to heavy containers or pallet loads. The features of this conveyor provide a good alternative for conveying heavy containers or pallet loads that have bottom surfaces that will not convey very well on Roller or Chain Conveyors. Belt tracking is not an issue with this style of conveyor.
A Transfer Cart can be a manually pushed or as an automatic “transfer” conveyor that conveys a pallet or unit load from one or more infeed lines, to one or more discharge lines, along fixed floor mounted guide rails. Depending on the thru-put rate requirement, this can be an excellent equipment choice to use instead of fixed conveyor and transfers.
Prime has designed and built a wide variety of vertical product lifts for individual product, cases, or pallet loads. These devices are generally designed for a specific application and infeed/discharge elevation.
Prime has designed and built a wide variety of vertical product lifts for individual product, cases, or pallet loads. These devices are generally designed for a specific application and infeed/discharge elevation.
Vacuum Head Pick & Place Carriage to Dispense or Collect Unit Load Pallet Boards
Rugged Construction
The Pallet Board Dispenser/Collector is used to de-stack or stack standard Unit Load Pallet Boards often used in a captive conveyor systems where some pallets are not normally conveyable.. Pallet board use is often affiliated with automated high rise storage/retrieval systems (AS/RS). This Unit can be provided with a Vacuum Pump or with a Venturi Vacuum System that runs off of factory air.
An Iron Cross is a Motorized/Air Operated Pallet Load reorientation unit. This device is typically used in a pallet conveyor system to re-orient a pallet load for strapping, labeling, or to facilitate load pick-up. A device of this nature is commonly designed for use with GMA or CHEP style pallets.
Slat Conveyor is a Two (or more) Strand Chain Conveyor with attachments for bolting product support slats to the chains. The primary benefit to Slat Conveyor is that it offers a solid conveying surface.
Heavy duty construction and the availability of long lengths make slat conveyors suitable for use on assembly lines.
This “Dual-Lane” Mat-Top Belt Conveyor is designed to gently rotate cases, boxes, or compacted bags conveyed onto a pallet pattern forming conveyor. The general application would be as an infeed conveyor to a palletizing cell. This Unit will rotate product at a higher rate of speed and gentler than a bump turn device.
A Disc Turntable is a powered rotating disc that conveys cases around a 90 or 180 degree corner, in a tight area. These will generally be used instead of live roller curves because of a tight space requirement. These Units are powered with a Friction Wheel Drive and Gear motor.
Available in: 36”, 48” and 60” diameters
Table-Top Chain Conveyor is commonly used for conveying parts or containers. This style of conveyor is advantageous as a positive means to convey product through straight lengths and corners. This conveyor is often used in container filling operations, packaging lines, or progressive manufacturing lines.
#1900MTB Mat Top Belt Conveyor utilizes hinged plastic belting as the conveying surface. The Belt is supported from a Box Channel Slider Bed with UHMW Wear/Guide Strips mounted to it. This conveyor is generally used to convey cases, containers, bottles, or pallet loads in environments that require some corrosion resistance.
Belt on Roller Conveyors are Belt-on-Roller Conveyors with a wide variety of belt choices (dependent on the application requirements) that is supported on a roller bed surface. These Conveyors are used to positively convey cases, containers, or drums. Because the roller bed belt support provides a lower coefficient of friction, heavier loads and longer conveyor lengths can be provided with this style of Belt Conveyor.
Slider Bed Belt Conveyors with a wide variety of belt choices (dependent on the application requirements) that is supported on a box channel slider bed conveying surface. These Conveyors are used to positively convey cases, containers, or drums. These Units can be provided with a Lagged End or Center Drive (4", 6", 8", 10" diameter); and, can also be provided with V-Groove Tracking guides (for those hard belt tracking applications).
Pop Up Transfers are used to lift and transfer heavy loads at right angles to a conveyor. Transfer stays lowered for product to pass over untill needed. Powder Coat finish in choice of 13 standard colors.
Features counterbalanced construction for easy operation.
Used to allow personnel or equipment access across a line of conveyor.
Typically found on long conveyor lines, or where a conveyor line blocks access to another area.
Available in powered and gravity construction.
Chain Driven Live Roller conveyors features rugged construction which makes it suitable for heavy loads up to 3000lbs such as pallets, drums, slave boards, and castings. Positive drive is ideal for use in oily, wet or contaminated environments. Powder Coat finish in choice of 13 standard colors.
STANDARD SIZES
1.9”, 2.5”, 2-5/8” and 3.5” Standard
FEATURES
12" - 60" Effective Width
Chain Sprocket (Underslung, Top Mount, or Side Mount)
Standard Inverter Ready TEFC Gearmotor (230V/460VAC)
30-60 FPM (Standard)
8"/6"x2 Formed Side Frames - Both Sides
2-1/2 Diameter x 11ga Galvanized or 2-5/8" 7ga Plain Steel with Springloaded 11/16" Hex Axel. (2) Welded Sprockets, Grease Packed/Sealed Bearings
Standard Roller Centers 3 1/4", 4, 4 1/2", 5", 6" and 7 1/2" on Center
Structural Steel Supports
Powder Coat (Many RAL Color Choices Available)